HP-67 Card Reader became very touchy
|
10-25-2023, 10:57 AM
Post: #41
|
|||
|
|||
RE: HP-67 Card Reader became very touchy
Hi Alevin,
i remember, that i had a HP97 board with the same issue, and i replaced every capacitor with no sucess. The problem was the CRC chip. I replaced it from a donor HP97 board and it worked again. Sometimes the solder joints are problematic, first try to resolder the CRC Chip. And check the ribbon cable to the cardreader with a multimeter. If you no donor board I can send you one or a CRC Chip. Ralf /41/48/ |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)