source for 2.5-inch thermal paper for TI PC-100A (SR-52, SR-56, TI-58/69)
|
12-20-2022, 10:57 PM
Post: #3
|
|||
|
|||
RE: source for 2.5-inch thermal paper for TI PC-100A (SR-52, SR-56, TI-58/69)
(12-20-2022 08:56 PM)brouhaha Wrote: Does anyone have a good source for 2.5-inch wide rolls of thermal paper for the TI PC-100 series printers that are used with the SR-52, SR-56, and TI-58/59 printers? The long-discontinued TI paper was TP-30250, which was a 2.5 inch wide by 3 inch diameter 85-foot roll. It appears that everything else in the universe uses 1.97-inch, 2.25-inch, 3.125-inch, or wider. Eric, closest I've found are rolls 62mm wide, which is 1.5 mm less than 2.5 inches. But maybe they would fit. It's a German site but perhaps this gives a hint what to look for. I have one of 62mm wide rolls from unknown source. Günter |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
source for 2.5-inch thermal paper for TI PC-100A (SR-52, SR-56, TI-58/69) - brouhaha - 12-20-2022, 08:56 PM
RE: source for 2.5-inch thermal paper for TI PC-100A (SR-52, SR-56, TI-58/69) - rprosperi - 12-20-2022, 10:16 PM
RE: source for 2.5-inch thermal paper for TI PC-100A (SR-52, SR-56, TI-58/69) - Guenter Schink - 12-20-2022 10:57 PM
RE: source for 2.5-inch thermal paper for TI PC-100A (SR-52, SR-56, TI-58/69) - brouhaha - 01-01-2023, 03:38 AM
RE: source for 2.5-inch thermal paper for TI PC-100A (SR-52, SR-56, TI-58/69) - Thomas Klemm - 01-01-2023, 06:08 AM
|
User(s) browsing this thread: 1 Guest(s)