48SX options
|
04-12-2023, 10:31 AM
(This post was last modified: 04-12-2023 03:43 PM by Hiwi.)
Post: #13
|
|||
|
|||
RE: 48SX options
(04-09-2023 04:16 AM)Eric Rechlin Wrote: A 48G (not GX) might be a good option too... Yes and it is expandable! Actually you can buy the G model at low prices. If you have no difficulty to open the HP48, you can upgrade to 128 KB very simple, to 256k as well and 768k with minor solder experience. 4Mb is possible but only for professionel users. IMHO 4Mb is not really recommended - what for ? :-) Parts are common and under 10 Euros expensive. There is a suitable way to open the HP48 without breaking it, using solvent to dissolve the keyboard overlay easily. I have done this upgrade already several times for me and friends. Here you see a G model with 768K it has 5 ports with 128k each, and it has Metakernel installed. [attachment=11967] Ralf /41/48/ |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
48SX options - Phrede - 04-07-2023, 03:28 PM
RE: 48SX options - Maximilian Hohmann - 04-08-2023, 12:23 PM
RE: 48SX options - rprosperi - 04-08-2023, 02:53 PM
RE: 48SX options - Maximilian Hohmann - 04-08-2023, 06:29 PM
RE: 48SX options - rprosperi - 04-09-2023, 01:25 AM
RE: 48SX options - Allen - 04-08-2023, 03:30 PM
RE: 48SX options - Phrede - 04-08-2023, 04:05 PM
RE: 48SX options - Phrede - 04-08-2023, 10:08 PM
RE: 48SX options - AndiGer - 04-09-2023, 06:21 AM
RE: 48SX options - Eric Rechlin - 04-09-2023, 04:16 AM
RE: 48SX options - Hiwi - 04-12-2023 10:31 AM
RE: 48SX options - rprosperi - 04-09-2023, 12:03 PM
RE: 48SX options - Allen - 04-11-2023, 01:01 AM
|
User(s) browsing this thread: 1 Guest(s)