Trying to Copy Program to Blank Card

[John Garza (3665)]

The only write-protect feature is the clipped card corners as described in the manual.

The surface smoothness is slightly different, or there could be contaminates, or just a bad card.

You can try:
1) rubbing both sides of the card on a soft cloth
2) try a different blank card
3) ensure the write protect gold leaf switch is adjusted properly. A quick way to test is to insert the Kemper correction card in the left slot before a write operation - this will force the leaf switch open.
4) adjust the drive wheel axle to get more grip on the card

Good luck!

-J