The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 795 - File: showthread.php PHP 7.4.33 (FreeBSD)
File Line Function
/showthread.php 795 errorHandler->error





Post Reply 
41C battery contact repair
04-06-2024, 11:59 PM
Post: #1
41C battery contact repair
I see where you can purchase new battery contacts either fully or just the flex PCB. I recently used a trimmed piece of 3M adhesive-backed, copper tape. Works perfectly. It seems like once the corrosion gets under the plastic coating on the flex PCB it keeps going. I trimmed the tape, folded it over the battery contact and up over the zebra-style contact stopping half way across. This way the contacts on the main PCB will will bridge from the battery to the main board and back to the expansion slots if the adhesive isn't as conductive as you would expect. It makes more sense when you look at the contact area.

Regards,

Jerry
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
41C battery contact repair - cncjerry - 04-06-2024 11:59 PM



User(s) browsing this thread: 1 Guest(s)