HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP-2225 Printer Carriage/Cable

Post Reply 
HP-2225 Printer Carriage/Cable
03-26-2023, 10:34 AM (This post was last modified: 03-26-2023 01:37 PM by Klaus Overhage.)
Post: #12
Klaus Overhage Offline
Member
 		Posts: 78
Joined: Jan 2016
RE: HP-2225 Printer Carriage/Cable
       
Hello Martin,
thank you very much for your guide "Fixing the ThinkJet". I have successfully used it to revive an HP-2225C. The flexible ribbon cable (HP Q7453A Carriage Assembly) comes from this Dutch seller:
https://www.arrayink.com/hp-q7453a-carri...embly.html
Because there is significantly more free space in the HP-2225C than in the HP-2225B, I was able to use an FPC FFC converter connector board 16P 1.0mm and connect it to the printer's mainboard with individual lines. Everything worked right away, as the test printout shows.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP-2225 Printer Carriage/Cable - aj04062 - 12-29-2013, 02:49 AM
RE: HP-2225 Printer Carriage/Cable - Klaus Overhage - 03-26-2023 10:34 AM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication