Post Reply 
Updated AMC_OS/X and New Manual
01-06-2014, 04:08 PM
Post: #10
RE: Updated AMC_OS/X and New Manual
(01-04-2014 05:28 PM)Geir Isene Wrote:  SUCCESS

Got the MOD-file extracted to three ROM files (the three banks) via the MLDL2K software.
Then cleared out three RAM 4K blocks on my 41CL (821, 822, 823)
Then loaded these three RAM blocks into pages 1L, 1U and 2L
Transfered the three ROM images to my 41CL using my Ruby program "pc41" to the three RAM blocks (821, 822, 823)
Checked to see that the ROMs were active using PGCAT. They were.
Erased the Flash block where I wanted to store the updated AMC-OSX module ("180000" YFERASE)
Wrote the three ROM bank files into Flash ("821>181" YFWR, "822>182" YFWR, "823>183" YFWR)
Unplugged the three modules from pages 1L, 1U and 2L
Added the new, updated module to the Image DB ("4OX3-2-181" IMDBINS)
Loaded the module into page 2U ("AOX3" PLUG2U)
And yes, it works!

Thanks.

There is no need to plug in the RAM pages during the procedure. The Extra Functions are happy to work with the entire physical address space. The YCRC function is the best way to check the integrity of an image, because it uses every bit in all 4k words to contribute to the final value.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Updated AMC_OS/X and New Manual - Monte Dalrymple - 01-06-2014 04:08 PM



User(s) browsing this thread: 1 Guest(s)