Post Reply 
HP 75 and the PIL-Box
01-01-2014, 04:54 PM
Post: #6
RE: HP 75 and the PIL-Box
After more investigation ...

I was able to cut the transfer time by three by configuring the FTDI Windows virtual com port.

1) Show Device Manager dialog.
[attachment=106]
2) Select the COM port and show Property dialog.
[attachment=109]
3) Select Port Setting tab and press the advanced button.
[attachment=110]
4) Change the Latency Timer (msec) from 16 to 1 then press all the OK buttons
[attachment=111]

Best regards,

Sylvain
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP 75 and the PIL-Box - Michael Fehlhammer - 12-31-2013, 02:39 AM
RE: HP 75 and the PIL-Box - Sylvain Cote - 12-31-2013, 04:03 AM
RE: HP 75 and the PIL-Box - Sylvain Cote - 12-31-2013, 03:08 PM
RE: HP 75 and the PIL-Box - hp41cx - 01-01-2014, 03:01 AM
RE: HP 75 and the PIL-Box - Sylvain Cote - 01-01-2014 04:54 PM
RE: HP 75 and the PIL-Box - Ángel Martin - 01-01-2014, 06:53 PM
RE: HP 75 and the PIL-Box - Sylvain Cote - 01-02-2014, 02:28 AM
RE: HP 75 and the PIL-Box - J-F Garnier - 01-02-2014, 04:16 PM
RE: HP 75 and the PIL-Box - danicaB - 01-04-2014, 04:57 AM
RE: HP 75 and the PIL-Box - Sylvain Cote - 01-04-2014, 06:57 PM
RE: HP 75 and the PIL-Box - J-F Garnier - 01-06-2014, 06:14 PM
RE: HP 75 and the PIL-Box - Oulan - 01-07-2014, 08:25 AM
RE: HP 75 and the PIL-Box - hp41cx - 01-07-2014, 10:15 PM
RE: HP 75 and the PIL-Box - hp41cx - 01-08-2014, 12:31 AM
RE: HP 75 and the PIL-Box - hp41cx - 01-08-2014, 12:22 PM
RE: HP 75 and the PIL-Box - Jerry - 01-08-2014, 05:59 PM
RE: HP 75 and the PIL-Box - Sylvain Cote - 01-08-2014, 07:20 PM



User(s) browsing this thread: 1 Guest(s)