Post Reply 
Returning to the HP fold
04-30-2015, 02:59 AM
Post: #41
RE: Returning to the HP fold
The timer is fine. I have used it in the kitchen (kitchen timers typically count down, my brain is happier with a count up version) and it is accurate enough for timing the mixing of ingredients. Wink

My big disappoint with the 55 is in regards to programming; it is so similar to my 25! Number of steps, what can be accomplished, NO continuous memory spring to mind.

Back then budget forced me to get a 25, and at the time it was fine. I even had it at work with a relay connected across the R/S switch to count machine cycles, worked great for that. Since I had no basis for comparison, the lack of continuous memory wasn't a big deal. Didn't even notice the lack of mass storage. Once I had tasted a 41 with a card reader, I never looked back.

A 41 with the Time module and mass storage of any stripe beats the socks off everything else.

2speed HP41CX,int2XMEM+ZEN, HPIL+DEVEL, HPIL+X/IO, I/R, 82143, 82163, 82162 -25,35,45,55,65,67,70,80
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Returning to the HP fold - TASP - 03-01-2015, 02:05 AM
RE: Returning to the HP fold - TASP - 03-01-2015, 03:02 PM
RE: Returning to the HP fold - d b - 03-01-2015, 04:30 PM
RE: Returning to the HP fold - TASP - 03-01-2015, 04:58 PM
RE: Returning to the HP fold - rprosperi - 03-01-2015, 05:34 PM
RE: Returning to the HP fold - TASP - 03-01-2015, 10:46 PM
RE: Returning to the HP fold - Jeff_Kearns - 03-02-2015, 01:57 AM
RE: Returning to the HP fold - TASP - 03-02-2015, 03:52 PM
RE: Returning to the HP fold - TASP - 03-03-2015, 06:34 PM
RE: Returning to the HP fold - TASP - 03-05-2015, 07:13 PM
RE: Returning to the HP fold - rprosperi - 03-05-2015, 07:42 PM
RE: Returning to the HP fold - TASP - 03-06-2015, 02:18 AM
RE: Returning to the HP fold - rprosperi - 03-06-2015, 03:53 AM
RE: Returning to the HP fold - TASP - 03-06-2015, 04:31 AM
RE: Returning to the HP fold - TASP - 03-06-2015, 07:01 AM
RE: Returning to the HP fold - TASP - 03-19-2015, 02:02 AM
RE: Returning to the HP fold - rprosperi - 03-19-2015, 01:08 PM
RE: Returning to the HP fold - TASP - 03-19-2015, 01:32 PM
RE: Returning to the HP fold - TASP - 03-19-2015, 05:29 PM
RE: Returning to the HP fold - TASP - 03-19-2015, 06:15 PM
RE: Returning to the HP fold - TASP - 03-19-2015, 07:12 PM
RE: Returning to the HP fold - TASP - 03-21-2015, 04:13 AM
RE: Returning to the HP fold - rprosperi - 03-21-2015, 12:26 PM
RE: Returning to the HP fold - TASP - 03-21-2015, 01:38 PM
RE: Returning to the HP fold - TASP - 03-22-2015, 07:08 PM
RE: Returning to the HP fold - TASP - 03-23-2015, 06:10 PM
RE: Returning to the HP fold - TASP - 03-24-2015, 01:56 PM
RE: Returning to the HP fold - TASP - 03-24-2015, 05:45 PM
RE: Returning to the HP fold - TASP - 04-27-2015, 02:18 AM
RE: Returning to the HP fold - bshoring - 04-29-2015, 09:17 PM
RE: Returning to the HP fold - TASP - 04-29-2015, 10:17 PM
RE: Returning to the HP fold - bshoring - 04-30-2015, 02:14 AM
RE: Returning to the HP fold - TASP - 04-30-2015 02:59 AM
RE: Returning to the HP fold - bshoring - 04-30-2015, 03:31 AM
RE: Returning to the HP fold - TASP - 04-30-2015, 03:48 AM
RE: Returning to the HP fold - TASP - 07-28-2015, 02:11 PM
RE: Returning to the HP fold - TASP - 03-10-2016, 08:35 PM
RE: Returning to the HP fold - TASP - 03-11-2016, 06:25 PM
RE: Returning to the HP fold - ehans - 03-11-2016, 06:54 PM
RE: Returning to the HP fold - TASP - 03-25-2016, 03:09 AM



User(s) browsing this thread: 3 Guest(s)