Post Reply 
rad, grad, deg
09-06-2015, 05:10 PM (This post was last modified: 09-06-2015 05:15 PM by ijabbott.)
Post: #3
RE: rad, grad, deg
(09-06-2015 04:50 PM)rprosperi Wrote:  
(09-06-2015 03:45 PM)tigger Wrote:  You can change between all these three mesures with "mode" and then "display" or "cas".

(I do not have my HP50g with me).

Is there any way to change this with softkeys. It means in one menu I might find "rad, grad, deg" in one line. Could I find such a menu by using softkeys?

Hold down [LS] and press [MODE], then press [F2-Angle], you will see the angle mode option softkeys.

This too is described in the manual; you really should research there before asking these kind of questions. It is the hope of most users here that a member will do reasonable research on their own time before posting questions here on the Forum.
Don't be too harsh. It isn't described in the obvious place in the manual, i.e. the part that tells you how to change the angle measure. I can't even see your sequence in the manual!

EDIT: It's in Appendix G of the advanced user's reference manual.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
rad, grad, deg - tigger - 09-06-2015, 03:45 PM
RE: rad, grad, deg - rprosperi - 09-06-2015, 04:50 PM
RE: rad, grad, deg - ijabbott - 09-06-2015 05:10 PM
RE: rad, grad, deg - rprosperi - 09-06-2015, 06:27 PM
RE: rad, grad, deg - Massimo Gnerucci - 09-06-2015, 07:41 PM
RE: rad, grad, deg - brickviking - 09-06-2015, 08:57 PM
RE: rad, grad, deg - Bill (Smithville NJ) - 09-07-2015, 12:31 AM
RE: rad, grad, deg - matthiaspaul - 09-07-2015, 12:03 PM
RE: rad, grad, deg - Joe Horn - 09-10-2015, 09:46 AM
RE: rad, grad, deg - Brad Barton - 09-10-2015, 02:22 PM
RE: rad, grad, deg - tigger - 09-06-2015, 06:29 PM
RE: rad, grad, deg - Brad Barton - 09-07-2015, 02:06 AM
RE: rad, grad, deg - rprosperi - 09-07-2015, 02:28 AM
RE: rad, grad, deg - Bill (Smithville NJ) - 09-07-2015, 02:27 PM
RE: rad, grad, deg - Allen - 09-07-2015, 02:30 PM
RE: rad, grad, deg - brickviking - 09-07-2015, 08:38 PM
RE: rad, grad, deg - Skyblues - 09-08-2015, 01:39 AM



User(s) browsing this thread: 1 Guest(s)