pyILPER Version 1.3.3 released

[Sylvain Cote]

Hello Joachim,

I did some other basic tests (1h) this morning with:
> HP-71B: HP71:1BBBB, HPIL:1B, KBD:B
> PIL-Box running v1.6 firmware
> MacBookPro v6.1
> Softwares: OSX 10.11.4, Python v3.5.1, Conda v4.0.5, pyserial v2.7, QT v4.8.7, lifutils v1.7.5, pyILPER v1.3.3

Drive [:TAPE(1) & :TAPE(2)]
> transferred ROM files from mass storage to FRAM71, no issues
> tried to load non LIF file and it rejected them correctly
> changed LIF file while 71B is on and the changes is reflected on the 71
> initialize works (more testing is needed here regarding the resulting LIF file size vs drive type)
> I still need to do testing with 41 & 75

Printer [PRINTER IS :PRINTER]
> works perfectly, no issues

Display [DISPLAY IS :DISPLAY]
> works perfectly, no issues

Display [KEYBOARD IS :DISPLAY]
> warning: I have not yet re-learned the technical background needed on the keyboard remapping feature to have a proper technical discussion here
> after the KEYBOARD IS :DISPLAY is entered, the IDY frame is constantly issued until I issue the KEYBOARD IS * and the RESET HPIL commands
>> (as seen in the Scope Window and on the internal PIL-Box LED)
> All the escape type keys does not works, including: ENTER, BACKSPACE, DELETE, ...
>> I assume I will have to create a keyboard mapping file using the ESCAPE keyword on the 71 to correct these

Scope
> an option to see either the incoming, the outgoing or both in/out IL frames would be fantastic
>> another option would be to have one incoming frames scope window and one outgoing frames window
> a raw hex window side-by-side with the decoded frames window would be great for debugging

On Score/Printer/Display windows
> a clear window button would be nice
> a scroll bar with a active/inactive auto scroll check box would be appreciated
>> another option would be to do a regular file flush, so that tail/cat/less/.. commands could be used on live data

Best regards,

Sylvain

edit: add lifutils version