HP Forums / Not HP Calculators / Not remotely HP Calculators v / Need two push buttons to be made for...

Post Reply 
Need two push buttons to be made for...
12-10-2016, 06:55 AM (This post was last modified: 12-10-2016 07:02 AM by Geoff Quickfall.)
Post: #6
Geoff Quickfall Offline
Senior Member
 		Posts: 784
Joined: Dec 2013
RE: Need two push buttons to be made for...
Jim!

Thanks for the heads up to tinkercad!!! Just finished creating the buttons in metalized aluminum plastic at Shapeways after creating the cad at tinkercad. It may need some refining and I must drill the correct hole in the centre spindle by hand, but they should look identical when done!

[Image: IMG_4012_zpsuxfqxey1.png]

Some sanding and shaping required to look like the original:

[Image: IMG_2028_zpsqws8f9am.jpg]

[Image: IMG_2032_zpsdsjqg87q.jpg]

The clock awaits:

[Image: IMG_2016_zps15c0cnmd.jpg]

Youtube video: https://youtu.be/Y1bB6Bjuu0g
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Need two push buttons to be made for... - Geoff Quickfall - 12-10-2016 06:55 AM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication