HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP97 printer gear replacement

Post Reply 
HP97 printer gear replacement
12-09-2021, 06:31 PM
Post: #10
pipesm Offline
Junior Member
 		Posts: 1
Joined: Dec 2021
RE: HP97 printer gear replacement
I just got an HP-97. The middle gear in the printer is broken. It doesn’t seem to be rubber, it is some beige plastic. It sits between the motor and printhead gear. Is this part the one mentioned above, or, do I need a different one?

Also, I get “error” when I attempt to insert a card, and the card reader seems to not engage the motor. I need to troubleshoot this more. I am guesding it sees the card, but fails to start motor. Will need to nose around with svope. Smile

Thoughts?

Thanks,
Mark
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP97 printer gear replacement - Hans-Peter - 11-14-2016, 09:06 PM
RE: HP97 printer gear replacement - Jlouis - 11-15-2016, 02:33 PM
RE: HP97 printer gear replacement - Jlouis - 11-15-2016, 02:37 PM
RE: HP97 printer gear replacement - Tom V - 08-21-2018, 05:25 PM
RE: HP97 printer gear replacement - Jlouis - 08-22-2018, 12:59 AM
RE: HP97 printer gear replacement - Tom V - 08-25-2018, 04:51 PM
RE: HP97 printer gear replacement - pipesm - 12-09-2021 06:31 PM
RE: HP97 printer gear replacement - teenix - 12-15-2021, 11:08 PM
RE: HP97 printer gear replacement - teenix - 12-15-2021, 09:07 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication