HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP97 printer gear replacement

Post Reply 
HP97 printer gear replacement
11-20-2016, 10:06 PM (This post was last modified: 12-03-2016 10:10 PM by bernouilli92.)
Post: #5
bernouilli92 Offline
Junior Member
 		Posts: 12
Joined: May 2015
RE: HP97 printer gear replacement
This gear is a better replacement:
http://www.modellbauershop.de/zahnraeder...30-z-1.php

It's cheaper and you don't need to reduce the thickness. But you still have to widen the hole.

There has been a post about it:
http://www.hpmuseum.org/forum/thread-601...l#pid53789
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP97 printer gear replacement - Hans-Peter - 11-14-2016, 09:06 PM
RE: HP97 printer gear replacement - Jlouis - 11-15-2016, 02:33 PM
RE: HP97 printer gear replacement - Jlouis - 11-15-2016, 02:37 PM
RE: HP97 printer gear replacement - bernouilli92 - 11-20-2016 10:06 PM
RE: HP97 printer gear replacement - Tom V - 08-21-2018, 05:25 PM
RE: HP97 printer gear replacement - Jlouis - 08-22-2018, 12:59 AM
RE: HP97 printer gear replacement - Tom V - 08-25-2018, 04:51 PM
RE: HP97 printer gear replacement - pipesm - 12-09-2021, 06:31 PM
RE: HP97 printer gear replacement - teenix - 12-15-2021, 11:08 PM
RE: HP97 printer gear replacement - teenix - 12-15-2021, 09:07 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication