New HP-41 module available: Ladybug

[Sylvain Cote]

(01-11-2017 05:26 PM)hth Wrote:  Could you give a step-by-step instruction on how to reproduce the problem you see with ADD?

Of the listed functions that works, they all reside in bank 1, apart from WSIZE that does switch to bank 2.

The arithmetics instructions listed all switch to bank 2.

If it were not for the WSIZE, I would suspect something in the bank handling. It does bank switching on the fly, just by having the code aligned properly between the two banks.

Håkan

Hello Håkan,

The Clonix-D module and the Genesis-41 emulator does not support the MOD format, so I have extracted the ROM files from the MOD file.
With your reply I understood that you were using bank switching which is something that I did not checked and/or expected.

My initial setup was :
[OS4.ROM > Page 4 - Bank 1] , [LADYBUG1.ROM > Page 8 - Bank 1] & [LADYBUG2.ROM > Page 9 - Bank 1]

My new setup is :
[OS4.ROM > Page 4 - Bank 1] , [LADYBUG1.ROM > Page 8 - Bank 1] & [LADYBUG2.ROM > Page 8 - Bank 2]

With this new configuration, everything is working as expected with Genesis-41 (I will test the Clonix-D tonight)

Sorry about that.

Sylvain