WP34 resets when using Y^X
|
02-28-2014, 06:07 PM
Post: #4
|
|||
|
|||
RE: WP34 resets when using Y^X
What is the minimum "safe" voltage of the WP-34s?
From the manual I see that batteries with voltage less thatn 2.8 V should be replaced. But this thread seems to hint 2.8 V may not be enough. I received refurbished HP-30b units from ebay and they all had a voltage of 3.0 V. I'm wondering what the life will be on these units and whether I should consider replacing the batteries immediately (if the nominal new voltage is more like 3.2 V). -Jonathan |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
WP34 resets when using Y^X - Randy - 02-28-2014, 02:03 AM
RE: WP34 resets when using Y^X - Paul Dale - 02-28-2014, 02:11 AM
RE: WP34 resets when using Y^X - Randy - 02-28-2014, 03:22 AM
RE: WP34 resets when using Y^X - Jonathan Cameron - 02-28-2014 06:07 PM
RE: WP34 resets when using Y^X - walter b - 02-28-2014, 09:44 PM
RE: WP34 resets when using Y^X - Randy - 03-01-2014, 12:13 AM
RE: WP34 resets when using Y^X - Marcus von Cube - 03-02-2014, 02:50 PM
RE: WP34 resets when using Y^X - Paul Dale - 03-01-2014, 12:54 AM
|
User(s) browsing this thread: 1 Guest(s)