Question on DM15L upgrading...

[rprosperi]

(06-28-2017 08:04 PM)Dave Britten Wrote:  That tripped me up a bit at first too. There should be a button labeled "Program" within the updater. Click that.

1. Connect the USB cable.
2. Launch the updater.
3. Select the correct COM port.
4. Click "Open" and select the firmware file.
5. Click the "Program" button in the updater.
6. Press the "Reset" button on the calculator (the updater program should be telling you to do this now if everything is working normally).

This worked for me. After clicking "Program" in the updater program, the update process in the window reacts and prepares to start, but waited for me to press the "Reset" pin with a paperclip for the actual update process to start.