Public Beta Availiable - Win/Mac/Firmware [UPDATED]
|
11-11-2017, 12:26 PM
Post: #84
|
|||
|
|||
RE: Public Beta Availiable - Win/Mac/Firmware [UPDATED]
Possible bugs in graph3d.
First, the Autoscale zoom option seems to always give the ! reply. Second.... If you try to plot a half a sphere using: FZ1=sqrt(16-(X^2+Y^2)) This should be a sphere of radius 4. You'll notice these extreme jaggies as it gets close to the plane z=0. At first, I thought it might just be rounding errors, but if you use a radius of 10, you can see the blank areas are much taller in the z direction than 1, which means it's not rounding error. It should be flush with the plane z=0. Try plotting the following: FZ1=sqrt(16-(X^2+Y^2)) FZ2=0 That'll plot the semi-sphere and the plane, which gives the following (the semi-sphere should be flush with the plane)... |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)