Post Reply 
newRPL - build 1255 released! [updated to 1299]
12-18-2017, 04:20 AM
Post: #16
RE: newRPL - build 1001 released!
(12-17-2017 09:22 PM)Francois Lanciault Wrote:  Hi Claudio,

Just installed the latest firmware.

Just to let you know, after re-boot I ended up with a bunch of new variables. One was called "OOOOAAA", one other "Local", the last one I don't remember. I just purged them and there is no side effects.

I tried the USB communication with the PC host. It works as you described. Lots of possible applications I can see. Need to have the simulator installed on my mac first.

Will try the matrix commands next.

François

Glad to hear USB works as expected, I only tested on my hardware so I'm not 100% sure the timings work for all hardware combinations.
Regarding the weird variable names, that happens when a variable name becomes corrupted, the recovery runs on power up and recovers the objects but assigns a random name. Most likely those were settings with names in ROM. Perhaps the names moved in the ROM (shouldn't but maybe I messed something up). In any case, settings are recreated and nothing bad happens. When you see those weird names, always take a look at what they are. If is not something important you lost, they are safe to delete.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: newRPL - build 1001 released! - pier4r - 12-16-2017, 08:03 AM
newRPL - on Hp 39gs - Martin Hepperle - 06-05-2019, 06:51 AM
RE: newRPL - build 1001 released! - Claudio L. - 12-18-2017 04:20 AM
RE: newRPL - build 1001 released! - pier4r - 12-23-2017, 10:16 AM
RE: newRPL - build 1001 released! - pier4r - 01-01-2018, 09:42 AM
t - Claudio L. - 01-01-2018, 03:06 PM
RE: newRPL - build 1001 released! - pier4r - 01-01-2018, 03:41 PM
RE: newRPL - build 1001 released! - pier4r - 01-02-2018, 04:54 PM
RE: newRPL - build 1001 released! - pier4r - 01-02-2018, 06:58 PM
newRPL - brickviking - 10-05-2018, 06:01 AM
How to participate? - erazor - 12-13-2019, 07:12 AM



User(s) browsing this thread: 1 Guest(s)