Post Reply 
Found these inside a non-working 71B
03-17-2018, 11:50 PM
Post: #132
RE: Found these inside a non-working 71B
(03-17-2018 09:50 PM)MikeSD Wrote:  Oh wait! I just realized that this was wired as a Port, in my test unit. Ports use pin 10, 11 and 12 also. Pin 12 is tied high though. Any chance those may be causing it not to behave properly as a port device? Wonder if those were also needed when wired into the port zero string? And does the Math also need any of those?
According to the H/W IDS, Ch. 6.1, ROM Pin Descriptions, those other signals aren't needed. OD could be connected, but it's only necessary if you want the Service Module to disable the ROM.

Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
What's U10? - Dave Frederickson - 03-15-2018, 03:43 PM
RE: Found these inside a non-working 71B - Dave Frederickson - 03-17-2018 11:50 PM

User(s) browsing this thread: 2 Guest(s)