Post Reply 
DM41L overlay files
06-28-2018, 12:29 PM
Post: #1
DM41L overlay files
I wanted to use an overlay with my DM41L but SM haven't managed to source any so far so I decided to make my own. I designed it in Fusion360 and exported the GCode to my CNC mill and was pleasantly surprised by the result.

In case anyone else has access to either a laser cutter or a CNC mill I have made the design files available on Thingiverse at the following location -
https://www.thingiverse.com/thing:2981286

as well as the Fusion360 online link at -
https://a360.co/2Ku8Dit

I have attached some pictures of the prototype overlays that were cut from photographic paper as a test while I await the arrival of some thin white plastic to produce the actual overlays.

I hope this is of some use to somebody.

Chris


Attached File(s) Thumbnail(s)
       
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
DM41L overlay files - kintekobo - 06-28-2018 12:29 PM
RE: DM41L overlay files - mfleming - 06-29-2018, 01:49 AM



User(s) browsing this thread: 1 Guest(s)