Wp34s firmware update problem
|
08-19-2018, 05:19 PM
Post: #1
|
|||
|
|||
Wp34s firmware update problem
Hello, after a long time (years) I got curious and decided to upgrade my wp34s, which was still at the latest "official" 2015 version. But what do they say about curiosity? Either I forgot how to do it, or something changed, anyway I can't seem to flash it, and I apparently bricked my calculator.
I'm using Linux, so I use the multi-platform tool. I connected the cable, then I prepared the calculator by On+D then On+S+S. The screen went off, I pressed On. As expected, I got nothing on the display. But when I try to run the flash tool... I get a "can't connect" error. I also tried the "Reset + On" trick, still no joy. The command I ran is sudo ./wp34sflashcmd calc_full.bin /dev/ttyUSB1 And yes, I checked that ttyUSB1 is the correct port for the adapter. Any hints on what to check next? The calculator was working very well, but I can't rule out some failure on the cable, though the pogo pins seem to be in excellent shape... Cristian |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Wp34s firmware update problem - Cristian Arezzini - 08-19-2018 05:19 PM
RE: Wp34s firmware update problem - Cristian Arezzini - 08-19-2018, 08:23 PM
RE: Wp34s firmware update problem - pascal_meheut - 08-20-2018, 04:18 AM
RE: Wp34s firmware update problem - BarryMead - 08-23-2018, 07:12 PM
|
User(s) browsing this thread: 1 Guest(s)