Restoring HP-65
|
01-12-2019, 10:24 PM
Post: #24
|
|||
|
|||
RE: Restoring HP-65
Today we have restored the second card reader.
We had two card readers, one with a magnetic head complete but very dirty and corroded, the second one with a better PCB but a very damaged head with some cables missing. We decided than to mix the two. Below you will find some pictures about the cleaning process. We basically soap washed with a toothbrush the bakelite with the head. The result is pretty good, although the bakelite is not as smooth as it should be. We also lubricated the engine which still has a good worm gear and was not necessary to fix. Head soldered to the new PCB and o-rings installed. We cleaned the teflon parts with some soap and reassembled. More pictures in the next post, since we are not able to attach more than 4 images per post ... [attachment=6756] [attachment=6755] [attachment=6754] [attachment=6753] Edoardo & Alberto |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)