Post Reply 
"Turbo"
04-27-2014, 02:29 PM (This post was last modified: 04-27-2014 02:34 PM by Sylvain Cote.)
Post: #8
RE: "Turbo"
(04-27-2014 11:54 AM)Alvaro Wrote:  There were very big (Hardware) problems with Overcloking PC´s mostly with ISA bus.
Most problematic was the Keyboard and HDD.
So "overcloking" must be done very carefully and people must know exactly what they are doing.
Not only Hardware failures are to expect but also data corruption are likely to happen.

Yep and this is why Monte is constantly toggling the 41CL speed (>x1 to x1 and back) to address those kind of issues (mostly IO's).

(04-27-2014 01:24 PM)John W Kercheval Wrote:  What I meant was, are there any other mods for calcs other than those I mentioned? For example, a pumped up 67, or anything else?

There is a RAM and speed upgrade available (here and here) for the HP-42S.

Best, Sylvain

[edit: add a second link]
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
"Turbo" - John W Kercheval - 04-27-2014, 04:13 AM
RE: "Turbo" - Massimo Gnerucci - 04-27-2014, 08:30 AM
RE: "Turbo" - jebem - 04-27-2014, 10:59 AM
RE: "Turbo" - Thomas Radtke - 04-27-2014, 11:42 AM
RE: "Turbo" - Alvaro - 04-27-2014, 11:54 AM
RE: "Turbo" - John W Kercheval - 04-27-2014, 01:24 PM
RE: "Turbo" - Raymond Del Tondo - 04-27-2014, 02:04 PM
RE: "Turbo" - Sylvain Cote - 04-27-2014 02:29 PM
RE: "Turbo" - Gerson W. Barbosa - 04-27-2014, 02:35 PM
RE: "Turbo" - jebem - 04-27-2014, 03:38 PM
RE: "Turbo" - Claudio L. - 06-20-2014, 01:32 PM
RE: "Turbo" - John W Kercheval - 04-27-2014, 04:39 PM
RE: "Turbo" - John W Kercheval - 04-27-2014, 04:41 PM
RE: "Turbo" - Sylvain Cote - 04-27-2014, 04:58 PM
RE: "Turbo" - Garth Wilson - 04-27-2014, 07:34 PM
RE: "Turbo" - John W Kercheval - 04-27-2014, 08:21 PM
RE: "Turbo" - Dave Frederickson - 06-19-2014, 06:55 PM
RE: "Turbo" - ttw - 06-20-2014, 03:53 AM
RE: "Turbo" - Katie Wasserman - 06-20-2014, 04:39 AM
RE: "Turbo" - Oulan - 06-20-2014, 06:35 AM
RE: "Turbo" - Ángel Martin - 06-20-2014, 08:48 AM
RE: New "Old" Member - Raymond Del Tondo - 06-20-2014, 02:27 PM
RE: "Turbo" - Jim Horn - 06-20-2014, 03:08 PM



User(s) browsing this thread: 1 Guest(s)