CMT71-64E HP-71b eprom module questions
|
06-05-2019, 02:19 PM
Post: #5
|
|||
|
|||
RE: CMT71-64E HP-71b eprom module questions
I did what you proposed, open the CMT 64K Module, desolder the 27C512 in PLCC 32, tried to read/program in a PLCC 32 Socket,
but that failed due to contact issues. So I soldered it with wires to a DIL socket. I could read the EEprom, Erase it, but re-programming failed, as did the second one. Since I could not easily get 27C512 chips, I bought a couple of T1-74 Memory Modules...., and used their Atmel 27C512, and could program them. Soldered a PLCC 32 socket on the CMT module, put the Atmel in it, and it did work !! The second one I did I continued to have contact problems, so I soldered the Atmel direct to the CMT, it did work. After some time, it failed, as did the one in the socket, if I do a CAT on the port, the Display turns blank. In short, too much work for no result. Peter |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)