Some questions on HP-41
|
09-14-2019, 11:44 PM
(This post was last modified: 09-14-2019 11:44 PM by Garth Wilson.)
Post: #22
|
|||
|
|||
RE: Some questions on HP-41
(09-14-2019 08:36 PM)HP67 Wrote: @garth yes, a module with some standard card slot would be amazing or to be honest I'd be quite happy with a module that hosted a server like the 48s have which could talk to Kermit over serial... I don't have Kermit capability on my 41 (not directly at least; maybe it could be done) but I do have the FSI164A HPIL-to-RS232 interface converter which is nearly identical to the HP82164A except that the FSI came with two RS-232 channels standard, and optionally up to eight, and optionally battery-powered. I suppose a module could be written to do the Kermit protocol over serial with the __164A. If you have HPIL, you can interface to nearly anything, one way or another. I also have the HP82165A HPIL-to-parallel interface converter, the HP82169A HPIL-to-IEEE488, and the HP92198 HPIL-to-80-column video. My HPIL module has the Extended I/O module built in, so it's a double module. Quote:Quote:Quote:Check the video in the link below, the SD card appears in minute 3:50 approx. Ok, my mistake. I took the first post too literally and went to 3:50, but missed the seconds between 3:40 and 3:50 where it shows him inserting the microSD card. http://WilsonMinesCo.com (Lots of HP-41 links at the bottom of the links page, http://wilsonminesco.com/links.html ) |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)