Post Reply 
YFNX does not work on my 41CL
09-18-2019, 04:50 AM
Post: #8
RE: YFNX does not work on my 41CL
(09-17-2019 05:18 PM)hth Wrote:  If I plug in the extreme functions module with "YFNX" PLUG1L, MMUEN, a CAT 2 causes the calculator to freeze. The only thing plugged in otherwise is a time module. YFNP can be plugged in without any problems.
I am running with an old image database that came with it (from years ago) as I never managed to update the module database.

That is a very old version of YFNX and YLIB. There were bugs, and not every feature in the manual was implemented at that time. I would recommend updating both of them before doing anything else.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
YFNX does not work on my 41CL - hth - 09-17-2019, 05:18 PM
RE: YFNX does not work on my 41CL - hth - 09-17-2019, 05:31 PM
RE: YFNX does not work on my 41CL - hth - 09-17-2019, 05:43 PM
RE: YFNX does not work on my 41CL - hth - 09-17-2019, 08:18 PM
RE: YFNX does not work on my 41CL - hth - 09-18-2019, 01:26 AM
RE: YFNX does not work on my 41CL - Monte Dalrymple - 09-18-2019 04:50 AM
RE: YFNX does not work on my 41CL - hth - 09-18-2019, 04:31 PM
RE: YFNX does not work on my 41CL - hth - 09-18-2019, 05:57 PM
RE: YFNX does not work on my 41CL - hth - 09-18-2019, 08:10 PM
RE: YFNX does not work on my 41CL - hth - 09-19-2019, 02:11 AM
RE: YFNX does not work on my 41CL - hth - 09-19-2019, 03:03 AM



User(s) browsing this thread: 2 Guest(s)