Post Reply 
HP41C - 16 registers missing
11-09-2019, 10:48 PM
Post: #3
RE: HP41C - 16 registers missing
Some things to try:

1. Have you tried the RAM module in all 4 slots?

2. Do you know that the slots work properly (e.g with a ROM module)? It's possible the connectors inside are dirty or damaged from a battery spill.

3. Can you test the RAM module on another 41C?

4. Try CAREFULLY cleaning the 'inside' contact side of the 'fingers' in the open side of the RAM module, perhaps they are dirty from age and/or a battery spill in an old 41 where it was stored. If you have it, clean the contacts with DeOxit RED; if not, try Isopropyl Alcohol.

Good luck, and please update this thread if/when you find the solution.

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP41C - 16 registers missing - bricator - 11-09-2019, 02:46 PM
RE: HP41C - 16 registers missing - hth - 11-09-2019, 07:49 PM
RE: HP41C - 16 registers missing - rprosperi - 11-09-2019 10:48 PM
RE: HP41C - 16 registers missing - Ken S - 11-10-2019, 12:51 AM



User(s) browsing this thread: 1 Guest(s)