Help programming WP 34s
|
12-22-2019, 07:45 PM
Post: #3
|
|||
|
|||
RE: Help programming WP 34s
Thanks for the help. I looked over the thread you linked, and I couldn't find anything that I thought I could try except for different programming cables (which I only want to try after I exhaust all other options, as this was intended to be a Christmas gift so I wouldn't have time to order a new cable). I've also tried an Arduino Nano (following the guide in the sourceforge repo), and it didn't work either. I usually use Linux, but I wanted to use MySamBa so I tried using Windows (I didn't know about the other tools until I had already downloaded everything).
I always press the on button before I flash, so I think it would be on when I flash it. I have a multimeter, an adjustable power supply, and one of those $20 oscilloscopes. The exact wording from MySamBa is "Error: Unable to Connect," and the other flashing tool says it didn't get a response from the calculator. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Help programming WP 34s - merlin04 - 12-22-2019, 04:32 AM
RE: Help programming WP 34s - John Galt - 12-22-2019, 07:16 PM
RE: Help programming WP 34s - merlin04 - 12-22-2019 07:45 PM
RE: Help programming WP 34s - John Galt - 12-23-2019, 12:23 AM
RE: Help programming WP 34s - burkhard - 12-24-2019, 06:06 AM
RE: Help programming WP 34s - merlin04 - 12-24-2019, 06:03 PM
RE: Help programming WP 34s - burkhard - 12-24-2019, 08:19 PM
|
User(s) browsing this thread: 1 Guest(s)