NP-25 Calculator 3d case and keys design
|
02-26-2020, 04:28 AM
(This post was last modified: 02-26-2020 04:30 AM by Craig Bladow.)
Post: #5
|
|||
|
|||
RE: NP-25 Calculator 3d case and keys design
(02-26-2020 04:08 AM)Steve Simpkin Wrote: I think Massimo was referring to the backslash symbol on the divide key on the lower-left key of the completed case. The original HP-25 had an obelus division symbol on this key. Oh, thank you for the explanation, the symbol choice is a combination of the readily available font and limited time to find a work around. The proper division symbol did not print clearly with the equipment I am using. All of the key legends could be made clearer by printing on a resin printer or using a smaller nozzle diameter on an fdm printer. Try CC41! |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
NP-25 Calculator 3d case and keys design - Craig Bladow - 02-25-2020, 02:20 AM
RE: NP-25 Calculator 3d case and keys design - Massimo Gnerucci - 02-25-2020, 07:21 AM
RE: NP-25 Calculator 3d case and keys design - Craig Bladow - 02-26-2020, 01:35 AM
RE: NP-25 Calculator 3d case and keys design - Steve Simpkin - 02-26-2020, 04:08 AM
RE: NP-25 Calculator 3d case and keys design - Craig Bladow - 02-26-2020 04:28 AM
RE: NP-25 Calculator 3d case and keys design - Massimo Gnerucci - 02-26-2020, 11:48 AM
RE: NP-25 Calculator 3d case and keys design - Craig Bladow - 02-26-2020, 01:37 PM
RE: NP-25 Calculator 3d case and keys design - Craig Bladow - 03-01-2020, 10:34 PM
|
User(s) browsing this thread: 1 Guest(s)