HP Forums / Not HP Calculators / Not quite HP Calculators - but related v / (Free42) tips & tricks: local flags

Post Reply 
(Free42) tips & tricks: local flags
07-27-2020, 11:15 PM (This post was last modified: 07-28-2020 12:49 AM by Sylvain Cote.)
Post: #38
Sylvain Cote Offline
Senior Member
 		Posts: 2,099
Joined: Dec 2013
RE: (Free42) tips & tricks: local flags
AND program published in the latest HPCC Datafile
  • HP-82143A Thermal Printer : TRACE mode set and used for program listing and execution tracing. => LISTING + EXECUTION
  • HP-82162A Thermal Printer : TRACE mode set and used for program listing and execution tracing. => identical to the 82143A listing
  • HP-82163A Video Interface : TRACE+STACK mode set and used for program listing and execution tracing. => LISTING 1 of 2 / LISTING 2 of 2 / EXECUTION VIDEO
Notes:
  • HP-82143A Thermal Printer : trace mode with stack not available, Flag 15 & 16 not used, physical switch is used
  • HP-82162A Thermal Printer : trace mode with stack not available, Flag 15 & 16 not used, physical switch is used
    => status byte / print mode values of 1,1 is used to report a carrier JAM and it is why Trace mode with Stack is not available at the switch.
  • HP-82163A Video Interface : trace mode with stack available, Flag 15 & 16 set to 1
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: (Free42) tips & tricks: local flags - Sylvain Cote - 07-27-2020 11:15 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication