Post Reply 
[WP-34S] DEG and RAD - diffs
06-05-2014, 05:45 PM
Post: #7
RE: [WP-34S] DEG and RAD - diffs
(06-05-2014 12:08 AM)pito Wrote:  
Code:
RAD mode
180.0/pi * asin(acos(atan(tan(cos(sin(9.0 * pi/180.0))))))

8.999999999999999999999999999999979

You need to do the conversion in each step, not only when you do the first sin() and after the last acos().

Marcus von Cube
Wehrheim, Germany
http://www.mvcsys.de
http://wp34s.sf.net
http://mvcsys.de/doc/basic-compare.html
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[WP-34S] DEG and RAD - diffs - pito - 06-05-2014, 12:08 AM
RE: DEG and RAD - diffs - Paul Dale - 06-05-2014, 12:53 AM
RE: DEG and RAD - diffs - pito - 06-05-2014, 06:27 AM
RE: [WP-34S] DEG and RAD - diffs - pito - 06-05-2014, 01:38 PM
RE: [WP-34S] DEG and RAD - diffs - Dieter - 06-05-2014, 11:12 AM
RE: [WP-34S] DEG and RAD - diffs - Marcus von Cube - 06-05-2014 05:45 PM
RE: [WP-34S] DEG and RAD - diffs - pito - 06-05-2014, 06:04 PM
RE: [WP-34S] DEG and RAD - diffs - pito - 06-05-2014, 07:57 PM
RE: [WP-34S] DEG and RAD - diffs - pito - 06-05-2014, 10:07 PM
RE: [WP-34S] DEG and RAD - diffs - Dieter - 06-06-2014, 05:27 PM
RE: [WP-34S] DEG and RAD - diffs - pito - 06-07-2014, 12:57 PM



User(s) browsing this thread: 1 Guest(s)