Post Reply 
µctrl Raspberryπ pico & arduino
01-23-2021, 12:22 PM
Post: #7
RE: Raspberryπ & arduino
Hello!

(01-23-2021 12:34 AM)Paul Dale Wrote:  The Pico ought to be enough by itself. It's the same speed as the processor used in the WP 34S and has a lot more RAM and flash. It's also dual core so double the speed if the parallelism can be effectively utilised.

That's certainly true. But I rather wait for that "Arduino Pico" or whatever they will call it, even if it costs a few Euros more. Because I will be able to use the Arduino IDE with which I am very familiar and which already runs on my Macintosh since over a decade.
And even more importantly I will be able to control almost any peripherial with it because there is such a large pool of readily available libraries out there.

Regards
Max
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Raspberryπ & arduino - Steve Simpkin - 01-23-2021, 12:06 AM
RE: Raspberryπ & arduino - Csaba Tizedes - 01-26-2021, 07:56 PM
RE: Raspberryπ & arduino - John Keith - 01-22-2021, 09:36 PM
RE: Raspberryπ & arduino - Paul Dale - 01-23-2021, 12:34 AM
RE: Raspberryπ & arduino - Craig Bladow - 01-23-2021, 02:01 AM
RE: Raspberryπ & arduino - Maximilian Hohmann - 01-23-2021 12:22 PM
RE: Raspberryπ & arduino - Paul Dale - 01-23-2021, 12:30 PM
RE: Raspberryπ & arduino - Csaba Tizedes - 01-26-2021, 03:21 PM
RE: Raspberryπ & arduino - John Keith - 01-26-2021, 06:56 PM
RE: Raspberryπ & arduino - cdmackay - 01-26-2021, 05:37 PM
RE: Raspberryπ & arduino - Liam Hays - 01-26-2021, 06:43 PM
RE: Raspberryπ & arduino - Liam Hays - 01-26-2021, 10:52 PM
RE: Raspberryπ & arduino - EdS2 - 01-27-2021, 10:01 AM
RE: Raspberryπ & arduino - Liam Hays - 01-27-2021, 09:56 PM
RE: Raspberryπ & arduino - ijabbott - 01-28-2021, 12:37 AM
RE: Raspberryπ & arduino - John Keith - 01-28-2021, 07:52 PM
RE: Raspberryπ & arduino - David Hayden - 02-02-2021, 10:35 PM
RE: Raspberryπ & arduino - grsbanks - 02-03-2021, 07:52 AM
RE: Raspberryπ & arduino - EdS2 - 02-03-2021, 09:49 AM



User(s) browsing this thread: 1 Guest(s)