Threaded Mode | Linear Mode

Dave Frederickson · (This post was last modified: 12-17-2021 07:19 PM by Dave Frederickson.)

(12-16-2021 08:08 PM)Erwin Wrote:
(12-15-2021 05:12 PM)Hans Brueggemann Wrote: try again doing a POKE"2C000", config$, but make sure that config$ is exactly 32 nibbles long.
example: if your config$ was "B3B4B5", then POKE "2C000", "B3B4B500000000000000000000000000"
see also Q5 in chapter 13 of the "DENVER 2016" manual.

Hello Hans,

I did this starting with POKE"2C000", ”D3E4D5D69718191A9BEEEF00” after that I saw that my iRAM is not present and did a POKE"2C000", "00 ... 32 times" and then the above one again but with the same result. I have no idea ... it is not possible to claim this IRAM port.
It is 128kb MAIN RAM and 32kb IRAM additional to the other modules (MATH 2b, JPC04 FTH41, CIRCUIT and FINANCE)

best regards
Erwin

Hi Erwin,

In which position was the E0000 jumper when you POKE'd the config string?

Can you provide a MEMBUF report?

Dave

Edit: Additionally, this violates the operating procedures for the ROM modules. Per the manuals, the modules should be "installed" one at a time.