[41CL WARP] XEQ+ oddness

[cdmackay]

thanks very much, Ángel,

(04-06-2021 12:42 PM)Ángel Martin Wrote:  

(04-05-2021 08:41 PM)cdmackay Wrote:  I press the − key, for 'Q', to find the function QREM, from the SM44 module.
On the DM41X, this works fine: QREM.

That's already odd, with your ROM configuration the first function shown in the "Q" section should be Q<>, in the WARP module in page B. Not sure why it shows you something from the SandMath, located in pages C/D

Good point. And odd that it finds QREM on my DM41X, which has:

4 LIB4
6 OSX P6
7 WARP P7
8 PWREXT
A/B SM44

so it ought not to have found QREM from page A there, either, from the first 'Q' press?

The DM41X is running with your 20210218 module set.

The 41CL with the 03/03/2021 clupdate, including the OS modules.

(04-06-2021 12:42 PM)Ángel Martin Wrote:  

(04-05-2021 08:41 PM)cdmackay Wrote:  On the 41CL, after I press 'Q', I get:

Code:

L'__

I know I'm hitting 'Q', because if I hold it, the display shows 'Q'. So what is that above?

That's definitely wrong, i suspect a version mismatch between the different ROMs involved - notably the Library#4 and the WARP. BTW I didn't see the library on your list, is it installed??

Apologies; I took that as read, yes LIB 4 in page 4.

(04-06-2021 12:42 PM)Ángel Martin Wrote:  

(04-05-2021 08:41 PM)cdmackay Wrote:  I try RCL, to see the XROM detail, but RCL has now been mapped to: M<>, so I get:

Code:

M<>'__

Pressing RCL at the XEQ+ prompt will take the "M" for function search, so M<> is the first one found in the bus. This time it works ok, not so with "Q" though

Except that I did not (on the 41CL) press RCL at the XEQ+ prompt; I pressed it after pressing 'Q' showed me "L'__"; I did that to see what page this "L'__" was on.

Also, if I do press RCL/M at the XEQ+ prompt, I get "MDY" (page 5, XROM 26 "TMOD"), not "M<>".

(04-06-2021 12:42 PM)Ángel Martin Wrote:  

(04-05-2021 08:41 PM)cdmackay Wrote:  Might it be my module order? On the 41CL I have:

8 OSX3
9 YFNX
A PWRX
B WARP
C SM44 (and D)

I checked Cat 6, but I have nothing assigned, other than the PWRX & SM44 launchers, to 11 and -11, and XEQ+ to 32 (on both devices).

Key assignments don't have any impact in the XEQ+ functionality, so never mind those.

Try the versions included in the attached ZIP file and let me know if things get any better...

thanks!

I'm not sure how to load individual modules using clupdate (rather than the official update); I'll look into that.