[41CL WARP] XEQ+ oddness

[Ángel Martin]

Thanks for the test report.

ok, no mysteries here... the latest revision of the WARP module doesn't have the function Q<> , it was replaced by R0R4 in the same FAT location just after P<>.

Thus pressing "Q" at the XEQ+ prompt doesn't find it (since it's not there anymore) - and a complete bus scan returns no hits starting with Q with that configuration -> "NO MATCH"

This changes when you plug the SandMath, which does have QREM (and several others: QROOT, QROUT, QNTL also in the "Q" section)

So it all appears to be working just fine, despite the apparent whimsical behavior. Consider that the ROM plug order will influence the sequence of appearance in the enumeration or course. BTW, one way to scan the bus for all matches (within a given letter) is pressing R/S once the first one is shown, that saves you pressing SST after each one.

Cheers,
ÁM


PS. The attached diagram should help understand the XEQ+ navigation...