[41CL WARP] XEQ+ oddness

[cdmackay]

I tried the new modules on my 41CL; the behaviour is slightly different, but still wrong, unfortunately. Apologies if I made any mistakes.

I transferred four ROM files from the above zip, to my 41CL, to these RAM pages:

Code:

820     LIBRARY4        0xBE5305A7
821     WARPB1          0x8A9BD03A
822     WARPB2          0x70025E66
823     WARPB3          0x2889F856

and checked their YCRC against that quoted by clupdate, as above: all good.

I then:

unplugged all but YFNX, and removed all key assignments

confirmed only YFNX plugged:

Code:

PLUG ?IMP ?
YFNX 9

loaded the new LIB4 from RAM to page 4
single-page, non-banked, at 0x820

Code:

"-820 4"
PPLUG

loaded and verified OSX (from flash) to page 8

Code:

"OSX3 8"
PPLUG
CAT 0 PGCAT

enabled USER keys (for OSX ALPHA change)

loaded and verified PWRX (from flash) to page A

Code:

"PWRX A"
PPLUG
ΣCL MMUCAT

loaded the new WARP from RAM to page B
single-page, banked, starting at page 0x821

Code:

"*821 B"
PPLUG

tried:

Code:

XEQ+
Q

which showed:

Code:

"Q        385

and backspace would not clear it; OFF/ON did.

Similarly for another letter that ought to be no match: J.

At this point I noticed that seven key assignments had been added, of the form:

Code:

TEXT 00-14

for (shifted) keys 14, 24, 35, 54, 63, 73 & 74. All with assignment "TEXT 00".


loaded and verified SM44 (from flash) to pages C/D

Code:

"SM44 C"
PPLUG
ΣFL LOGYX

Code:

XEQ+
Q

gives:

Code:

"Q        385