HP50g emulator connectivity

[Neve]

(07-09-2021 04:53 PM)3298 Wrote:  

(07-09-2021 12:52 PM)Neve Wrote:  the HP50g emulator

That's not very specific ... most people use Emu48, and I know the screenshots can't be from x49gp (which only has the main UI consisting of a calculator image, plus the context menu and two folder- / file-open dialogs added by me). Honestly, I don't recognize that settings menu; I'll resort to telling you what I do know about emulator import and export.

This is the official HP50g emulator from HP.
I’m not fond of Emu48. I find it too complicated.

(07-09-2021 04:53 PM)3298 Wrote:  On x49gp (which isn't compatible with Windows - but it is compatible with Linux and Mac), file transfer is only possible via the SD card. You can mount a folder as SD in the context menu that pops up when you right-click on the virtual screen; that creates a virtual SD on the fly from the folder contents. Alternatively, you can mount a file as SD, but the file would have to be a binary image with file system inside which is recognized by the calculator (FAT16 or FAT32), which makes it difficult to get normal object files inside. If the object is on a real SD card (e.g. because it was put there by the physical calculator), its device file (e.g. /dev/sdb) could be used for that option, though.

Do you happen to have a link? The one I found here https://sourceforge.net/projects/x49gp/
Is empty…

(07-09-2021 04:53 PM)3298 Wrote:  I'm on Linux, but since software availability on Mac is usually similar, I'll list what I use:
- Most of the time, I move files via the SD card.
- There is a third-party program called HPTalx, which talks to the calculator via kermit on the USB cable.
- Plain ol' kermit or xmodem in a terminal should do the job too. As with HPTalx, the port the calculator ought to show up as is ttyUSB<number>, or ttyS<number> if you happen to use some kind of serial cable instead of USB.

I’ll try HPTalx if I can find it.