(HP41) Nov64d setup not working ("gamma" not executable)

[floppy]

Thanks Sylvian for the offer to support.
Lets go back from the start before I make more mess around.

Background:
- beginner who never has made any Clonix/Nov setup; this is the first (methodology unknown; automatic tools for setup check unknown; methodology for choosing Bnk&Page# in Nov64d not known; libraries conflict situations unknown = knowledge missing and has to be increased the next weeks and months)
- programs running in V41 with available librairies (see post #1) on a Linux 64bits PC

Hardware at hand:
- HP41CX
- HP-IL connector (& pilbox etc) in Port3
- X-memory (double) in Port 2 (XEQ "EMDIR" give 600 as result)
- Nov64d in Port 1
- PicKit2
(all tested and so far working fine)

Target: make a program, running in V41, now running in a CX; specific functions
- "SOLVE" from Advantage (in assembler) or optional "SOL" from Math (=not so quick like SOLVE from Advantage)
- "GAMMA" from SandMath44

Step1: identify the modules to be uploaded into the Nov64d (so far identified; no HEPAX possible with so much math modules)
(all below for "GAMMA"? to be confirmed)
- SMAT41
- SMAT42
- SMAT43
- SMAT44
- LIBRARY4
(below for "SOLVE"? to be confirmed)
- ADVL1-1B
- ADVU1-1B
- ADVU2-1B
- HLMAT41
- HLMAT42
- HLMAT43
- HLMAT44

Step2: identify the Bnk&Page# where to put these 12 modules

Any support for the Step1 and 2 is welcome.