Post Reply 
FORTH for the SHARP PC-E500 (S)
10-28-2021, 03:11 PM
Post: #34
RE: FORTH for the SHARP PC-E500 (S)
It is not necessary at all to transfer the 26k byte file FORTH500.UUE to the PC-E500 in order to convert it into the program file with UUDECODE. Both steps can be done together:

On the PC-E500, load UUDECODE into the area for machine language programs as shown above.
LOAD M "UUDECODE.MMM"


On the PC, open FORTH500.UUE in the terminal program (MBSharpNotepad for me) and prepare for sending to the Sharp.

Start UUDECODE on the PC-E500 with the parameter COM: and start sending on the PC.
CALL &BE000"COM:
uudecode V1.1 by E.Kako
filename = 'E: FORTH500.'
after approx. 6 minutes 52 seconds
decoded.

This way you get to the file "FORTH500" 3 minutes faster and you need 26K less space in the RAM drive!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
FORTH for the SHARP PC-E500 (S) - Helix - 09-06-2021, 11:41 PM
RE: FORTH for the SHARP PC-E500 (S) - Klaus Overhage - 10-28-2021 03:11 PM



User(s) browsing this thread: 1 Guest(s)