Need to press reset button.
|
09-08-2021, 10:03 PM
Post: #2
|
|||
|
|||
RE: Need to press reset button.
I am possibly reaching for simple, non-sequitor scenarios.
I routinely switch from the Function applet to the Python applet. I have occassionally had to press the the Clear touch button to proceed with the Python applet. I don't know if one or both of your programs are in ppl, python, cas,...etc. Check for the usual lower/upper case and local/global variables. As an aside I once was working the malloc functions of QuickC under ms-dos. After a call to m$, I discovered I had to allocate an extra 256 bytes to allocate and deallocated due to the 8088 segmented memory architecture. I hope this post will somehow lead to a solution to your problem. Cheers. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Need to press reset button. - matalog - 09-08-2021, 12:39 AM
RE: Need to press reset button. - Liamtoh Resu - 09-08-2021 10:03 PM
RE: Need to press reset button. - ndzied1 - 09-10-2021, 05:29 PM
RE: Need to press reset button. - Tim Wessman - 09-11-2021, 07:45 AM
RE: Need to press reset button. - Guenter Schink - 09-11-2021, 04:28 PM
RE: Need to press reset button. - Tim Wessman - 09-12-2021, 10:07 AM
RE: Need to press reset button. - matalog - 09-21-2021, 09:32 PM
RE: Need to press reset button. - Albert Chan - 09-22-2021, 12:52 PM
|
User(s) browsing this thread: 1 Guest(s)