Post Reply 
WP34s Programming Cable
02-14-2014, 12:41 PM
Post: #52
RE: WP34s Programming Cable
(01-29-2014 02:36 AM)sa-penguin Wrote:  
(01-28-2014 08:56 PM)dewster Wrote:  This worked for me ($4 USD):
http://www.newegg.com/Product/Product.as...2E614S7991
I feel like I'm making delaying excuses, worried the flashing procedure won't work. It's time to "have a go" with what I have on hand.
If the wheels fall off, I'm happy to buy a pre-configured 34s.
I am now the owner of the USB serial board, same as mentioned in the WP34S docs. I've just spent the evening trying to install it. I stuffed it up, just a tad.
The board, as per the Appendix H pictures, goes over a post. To make it do this, you need to cut back supports with an art knife. I didn't cut away enough, and the board only went half-way down the post.

The problem came when I tried to re-assemble the case: there's an LCD support in the case that now hits the mini-USB board.
So my careful work needs to be stripped out, the post supports CORRECTLY cut away, and reinstall the board again.

Oh well.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
WP34s Programming Cable - StephenR0 - 12-20-2013, 10:11 PM
RE: WP34s Programming Cable - dewster - 12-27-2013, 08:07 PM
RE: WP34s Programming Cable - walter b - 12-27-2013, 10:42 PM
RE: WP34s Programming Cable - StephenR0 - 12-27-2013, 08:45 PM
RE: WP34s Programming Cable - dewster - 12-29-2013, 06:24 PM
RE: WP34s Programming Cable - walter b - 12-29-2013, 06:28 PM
RE: WP34s Programming Cable - dewster - 12-29-2013, 08:31 PM
RE: WP34s Programming Cable - walter b - 12-29-2013, 10:16 PM
RE: WP34s Programming Cable - StephenR0 - 12-29-2013, 10:29 PM
RE: WP34s Programming Cable - htom trites - 12-29-2013, 11:02 PM
RE: WP34s Programming Cable - StephenR0 - 12-30-2013, 01:47 AM
RE: WP34s Programming Cable - dewster - 12-30-2013, 11:06 PM
RE: WP34s Programming Cable - Paul Dale - 12-30-2013, 11:26 PM
RE: WP34s Programming Cable - dewster - 12-31-2013, 12:45 AM
RE: WP34s Programming Cable - walter b - 12-31-2013, 07:12 AM
RE: WP34s Programming Cable - dewster - 01-06-2014, 04:44 PM
RE: WP34s Programming Cable - Mark Hardman - 01-15-2014, 08:43 PM
RE: WP34s Programming Cable - Mark Hardman - 01-15-2014, 11:36 PM
RE: WP34s Programming Cable - StephenR0 - 01-16-2014, 04:26 AM
RE: WP34s Programming Cable - walter b - 01-16-2014, 05:18 AM
RE: WP34s Programming Cable - StephenR0 - 01-16-2014, 06:00 AM
RE: WP34s Programming Cable - dewster - 01-18-2014, 12:49 PM
RE: WP34s Programming Cable - StephenR0 - 01-18-2014, 05:04 PM
RE: WP34s Programming Cable - walter b - 01-18-2014, 05:55 PM
RE: WP34s Programming Cable - walter b - 01-18-2014, 07:14 PM
RE: WP34s Programming Cable - StephenR0 - 01-18-2014, 06:48 PM
RE: WP34s Programming Cable - sa-penguin - 01-26-2014, 04:21 AM
RE: WP34s Programming Cable - sa-penguin - 01-26-2014, 11:55 PM
RE: WP34s Programming Cable - walter b - 01-28-2014, 03:23 PM
RE: WP34s Programming Cable - dewster - 01-28-2014, 08:56 PM
RE: WP34s Programming Cable - sa-penguin - 01-29-2014, 02:36 AM
RE: WP34s Programming Cable - sa-penguin - 02-14-2014 12:41 PM
RE: WP34s Programming Cable - StephenR0 - 01-29-2014, 04:30 PM
RE: WP34s Programming Cable - dewster - 01-30-2014, 08:19 PM
RE: WP34s Programming Cable - StephenR0 - 01-31-2014, 04:39 PM
RE: WP34s Programming Cable - StephenR0 - 02-01-2014, 02:05 AM
RE: WP34s Programming Cable - walter b - 02-01-2014, 08:19 AM
RE: WP34s Programming Cable - walter b - 02-01-2014, 12:30 PM
Tx and Rx - Dave Frederickson - 02-17-2014, 01:32 AM
RE: WP34s Programming Cable - dewster - 02-19-2014, 05:27 PM
RE: WP34s Programming Cable - dewster - 02-22-2014, 04:10 PM
RE: WP34s Programming Cable - sylvandb - 02-22-2014, 10:33 PM
RE: WP34s Programming Cable - Bit - 02-01-2015, 04:40 AM
RE: WP34s Programming Cable - John Galt - 02-01-2015, 05:39 AM
RE: WP34s Programming Cable - Bit - 02-01-2015, 06:25 AM
RE: WP34s Programming Cable - John Galt - 02-01-2015, 02:55 PM
RE: WP34s Programming Cable - Bit - 02-01-2015, 03:12 PM



User(s) browsing this thread: