Post Reply 
Nonpareil and 10C ROM
08-22-2022, 02:57 PM
Post: #4
RE: Nonpareil and 10C ROM
(08-21-2022 12:06 PM)Mark H. Shin Wrote:  Hello Forum Members,

I've been playing with Nonpareil and read a post on this forum that the 10C ROM was included in the HHC 2021 USB drive.

I acquired the drive, and the 10C ROM was indeed included, so I immediately loaded it into the Nonpareil 11C...

The results were a bit surprising:

1. It passes the self-test:
[Image: self-test.png]
2. Keyboard test displays exact same segments with each key press as other Voyager models, but the final display is as below (should be 10):
[Image: kb-test.png]
3. Initial display after power on (0.0000):
[Image: initial.png]

Clearly, the segment mapping for the displaying numbers is different than the others in the Voyager Series.

I wonder if members can offer any clues as to the differences in segment mapping for the 10C vs. 11C, 11C, 15C & 16C.

And, also offer any ideas, as to how I might be able to change the segment mapping parameters in the Nonpareil code.

For some reason, the 10C has a completely different key mapping than that of the other voyager models. I can send you the 10C keymap if your interested.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Nonpareil and 10C ROM - Mark H. Shin - 08-21-2022, 12:06 PM
RE: Nonpareil and 10C ROM - rprosperi - 08-21-2022, 04:07 PM
RE: Nonpareil and 10C ROM - Mark H. Shin - 08-21-2022, 04:44 PM
RE: Nonpareil and 10C ROM - agarza - 08-22-2022 02:57 PM
RE: Nonpareil and 10C ROM - Mark H. Shin - 08-22-2022, 03:06 PM
RE: Nonpareil and 10C ROM - J-F Garnier - 08-22-2022, 06:14 PM
RE: Nonpareil and 10C ROM - Mark H. Shin - 08-22-2022, 07:12 PM
RE: Nonpareil and 10C ROM - Mike T. - 08-22-2022, 09:24 PM
RE: Nonpareil and 10C ROM - Mark H. Shin - 08-22-2022, 09:52 PM
RE: Nonpareil and 10C ROM - Duane Hess - 08-25-2022, 02:08 AM
RE: Nonpareil and 10C ROM - J-F Garnier - 08-27-2022, 08:04 AM
RE: Nonpareil and 10C ROM - johanw - 08-28-2022, 07:07 PM



User(s) browsing this thread: 1 Guest(s)