HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP-71B Auto on

Post Reply 
HP-71B Auto on
02-07-2023, 04:30 PM
Post: #6
Sylvain Cote Offline
Senior Member
 		Posts: 2,105
Joined: Dec 2013
RE: HP-71B Auto on
The behavior you are seeing are happening to me when I am pushing the HP-IL interface to its limits.
Like Jean-François is suggesting, RESET HPIL normally works, but sometime it does not, when that happens I do a hardware reset like the following ...
  • HP-71B OFF
  • remove HP-IL module
  • HP-71B ON
  • wait a couple of seconds
  • HP-71B OFF
  • insert HP-IL module
  • HP-71B ON
  • RESET HPIL
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP-71B Auto on - Erwin - 01-30-2023, 10:37 AM
RE: HP-71B Auto on - J-F Garnier - 01-30-2023, 12:30 PM
RE: HP-71B Auto on - Erwin - 01-30-2023, 06:05 PM
RE: HP-71B Auto on - Erwin - 02-07-2023, 04:50 AM
RE: HP-71B Auto on - J-F Garnier - 02-07-2023, 10:12 AM
RE: HP-71B Auto on - Sylvain Cote - 02-07-2023 04:30 PM
RE: HP-71B Auto on - J-F Garnier - 02-07-2023, 07:30 PM
RE: HP-71B Auto on - Erwin - 02-07-2023, 06:37 PM
RE: HP-71B Auto on - Erwin - 02-07-2023, 07:58 PM
RE: HP-71B Auto on - Erwin - 02-08-2023, 10:58 AM
RE: HP-71B Auto on - Sylvain Cote - 02-09-2023, 03:49 PM
RE: HP-71B Auto on - J-F Garnier - 02-10-2023, 08:11 AM
RE: HP-71B Auto on - brouhaha - 02-10-2023, 09:03 AM
RE: HP-71B Auto on - J-F Garnier - 02-11-2023, 10:41 AM
RE: HP-71B Auto on - Erwin - 02-10-2023, 12:34 PM
RE: HP-71B Auto on - Sylvain Cote - 02-10-2023, 07:53 PM



User(s) browsing this thread: 3 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication