41CL - Library 4 and my configuration - instructions for how I did it
|
08-16-2014, 09:05 PM
Post: #1
|
|||
|
|||
41CL - Library 4 and my configuration - instructions for how I did it
To get this arrangement:
4: Library 4 / CL Library in 2nd bank. 4LIB is the name. 5: Timer – physically plugged in. 6: PowerCL non-Extreme – Library 4 - PWRL 7: YFNP 8: AMC OS/X - 3 bank rom Library 4 – OSX3. 9: TVMY A: Sandmath 3x3 – Library 4 version. SM33 B: Sandmath 3x3 – Library 4 version. (Continued) ------------------------------------------- So, here goes! Make the 41CL show MEMORY LOST XEQ ALPHA MMUCLR ALPHA First, let's get Library 4 put in the proper place. For V3/V4 boards: ALPHA 804040-8120 ALPHA XEQ ALPHA YPOKE ALPHA For V2 boards: ALPHA 804040-803F ALPHA XEQ ALPHA YPOKE ALPHA Press OFF then ON ALPHA PWRL ALPHA XEQ ALPHA PLUGP ALPHA ALPHA YFNP ALPHA XEQ ALPHA PLUGH ALPHA ALPHA OSX3 ALPHA XEQ ALPHA PLUG1L ALPHA ALPHA TVMY ALPHA XEQ ALPHA PLUG1U ALPHA ALPHA SM33 ALPHA XEQ ALPHA PLUG2 ALPHA XEQ ALPHA MMUEN ALPHA Press OFF then ON. (Probably not necessary, but I did it anyway). Voila! I must admit I feel really stupid because I struggled for a bit figuring this out. So, in case anyone else is suffering quietly and to come clean with my stupidity, here's a record for the world of what I did. Notes: 1) SM33 is merely a rom that plugs into an entire port. Don't worry that it has 2 pages each containing 3 banks. It's just the same as plugging in an 8K rom like the PPCM. 2) OSX3 is a 3 bank library 4 aware version of the CCD/OSX style rom. Even though it is 3 banks, it is plugged in using the same command you would use to plug in a 4K rom. 3) PowerCL is the Library 4 aware version of the 41CL Utils rom. If you are using PowerCL, you do not need any version of the 41CL Utilities rom. And, note that I have it plugged into page 6. It can safely sit in the printer page (as long as you are not using the printer of course). It is one of the few roms that can sit there and operate properly. 4) I have used YFNP because that is the version of the Y-functions to use if you are using the PowerCL module. If you use the PowerCL Extreme library 4 aware rom, then you should use YFNX instead of YFNP. 5) Note the different ALPHA entry for the Library 4 YPOKE command for V2 vs. V3/V4 41CL boards. Questions? I had a bunch a week ago. Be glad to try to help anyone. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
41CL - Library 4 and my configuration - instructions for how I did it - Gene - 08-16-2014 09:05 PM
RE: 41CL - Library 4 and my configuration - instructions for how I did it - Gene - 08-16-2014, 09:48 PM
RE: 41CL - Library 4 and my configuration - instructions for how I did it - Ángel Martin - 08-17-2014, 08:06 AM
RE: 41CL - Library 4 and my configuration - instructions for how I did it - Gene - 08-17-2014, 10:16 PM
RE: 41CL - Library 4 and my configuration - instructions for how I did it - Ángel Martin - 08-18-2014, 05:58 AM
|
User(s) browsing this thread: 1 Guest(s)