USBOpen(), USBSend() and USBRecv()

Threaded Mode | Linear Mode

USBOpen(), USBSend() and USBRecv()

05-01-2023, 03:37 PM

Post: #11

matalog Offline

Senior Member

Posts: 348
Joined: May 2021

RE: USBOpen(), USBSend() and USBRecv()

(05-01-2023 01:53 PM)KeithB Wrote: It might only have a 10 byte buffer and you are overfilling it.

What might only have a 10 byte buffer? The FT260 has a 64 byte (at least 60) buffer.

The FTDI232 has got a 128 byte buffer.

I can send 64 bytes from Calc to PC through the same 2 devices, and it is picked up fine.

« Next Oldest | Next Newest »

Messages In This Thread

USBOpen(), USBSend() and USBRecv() - matalog - 04-28-2023, 11:24 PM

RE: USBOpen(), USBSend() and USBRecv() - gehakte_bits - 04-29-2023, 02:47 AM

RE: USBOpen(), USBSend() and USBRecv() - matalog - 04-29-2023, 05:36 PM

RE: USBOpen(), USBSend() and USBRecv() - matalog - 04-29-2023, 10:00 PM

RE: USBOpen(), USBSend() and USBRecv() - gehakte_bits - 04-30-2023, 03:17 PM

RE: USBOpen(), USBSend() and USBRecv() - matalog - 04-30-2023, 08:37 PM

RE: USBOpen(), USBSend() and USBRecv() - Jacob Wall - 04-30-2023, 11:51 PM

RE: USBOpen(), USBSend() and USBRecv() - gehakte_bits - 05-01-2023, 02:23 AM

RE: USBOpen(), USBSend() and USBRecv() - matalog - 05-01-2023, 12:51 PM

RE: USBOpen(), USBSend() and USBRecv() - KeithB - 05-01-2023, 01:53 PM

RE: USBOpen(), USBSend() and USBRecv() - matalog - 05-01-2023 03:37 PM

RE: USBOpen(), USBSend() and USBRecv() - matalog - 05-01-2023, 07:23 PM

RE: USBOpen(), USBSend() and USBRecv() - gehakte_bits - 05-01-2023, 07:41 PM

RE: USBOpen(), USBSend() and USBRecv() - matalog - 05-01-2023, 08:43 PM

RE: USBOpen(), USBSend() and USBRecv() - matalog - 05-12-2023, 09:53 PM

RE: USBOpen(), USBSend() and USBRecv() - gehakte_bits - 05-12-2023, 11:32 PM

User(s) browsing this thread: 1 Guest(s)