WP-34S Manual (Version 3.3 Error)

[BarryMead]

On page 19 of the manual, the example says to type (40, Enter, 30, ->Polar). This should read (30, Enter, 40, ->Polar) for the
angle to appear as shown (36.8698976). Entering the numbers shown in the manual (40, Enter, 30, ->Polar) you get an angle
of (53.1301024).

To be consistent with the diagram on the following page (Page 20) the Y (Vertical) value should be 30 and the X (Horizontal) value
should be 40.