HP-25C Eumulator
|
10-10-2014, 06:08 PM
Post: #36
|
|||
|
|||
RE: HP-25C Eumulator
The "early" unit has been shipped out. I am planning for the rest of the kits.
I had ordered led modules enough to do 5 units. There can only be up to about 5/6 kits. The kits will be sold for $30, add $10 for assembly. Shipping is $10 US & international, $6 Canada. I cannot do less than this, all the logistics are taking me time. I am also happy to build your own if you choose so. Firmware is open sourced, if you want the Gerber files, I can send to you via PM. If you have not touch a soldering iron for a while, I suggest you let me assemble and test it. For assembly, you can choose not to have the LEDs soldered (just friction fit), the most costly components are the LEDs, so may be you don't want to "fixed" it on the board. If you choose to solder it yourself, I cannot guarantee the final unit, except that I will tested all components prior to shipping and will test the firmware. I am making a list of wants here based on previous posts, also order by date. Harald_____________ early unit going his way. Missimo, Thomas and Neil, not sure if you are going for one, please let me know. hp41cx____________ 2 units. Sylvian____________ 1 unit. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)