Post Reply 
Eprom Modules for the HP 75
10-09-2014, 12:53 AM
Post: #3
RE: Eprom Modules for the HP 75
(10-06-2014 02:52 AM)Paul Berger (Canada) Wrote:  Finding a compatible connector will be a big issue, the pitch for the connector is very odd and I have never seen any like it. A gentleman I correspond with has a tool for measuring connectors and he says the pitch is 0.109 inches, it is just far enough off of the common 0.1 inch pitch be be a problem.

Bonjour Paul,

I found this edge connector on DigiKey that could be used for a front port connector
http://www.digikey.ca/product-detail/en/...ND/2310840
It is too deep but at first look the other specs seems ok.
I will open up a broken 75 that I have this weekend, take the exact mesurements for my connector research and then order some promising connectors for testing.

Best regards,

Sylvain
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Eprom Modules for the HP 75 - Sylvain Cote - 10-09-2014 12:53 AM



User(s) browsing this thread: 1 Guest(s)