Post Reply 
[FRAM71] Pre-Production Batch
05-07-2015, 08:57 PM (This post was last modified: 05-07-2015 11:31 PM by Dave Frederickson.)
Post: #103
RE: [FRAM71] Pre-Production Batch
(05-07-2015 08:01 PM)Paul Berger (Canada) Wrote:  When I look at the MEM files, that came with the package of ROM images made available here recently, with a HEX editor on my PC I see that they are strings of 64 ASCII characters followed by 0x0d (CR) 0x0A (LF), when I create a TEXT file on a 71B, such as using transform to convert a BASIC program to TEXT the file it creates has variable length records each one starting with a byte of 00 followed by a 1 byte length and no CR LF at the end of a record.

Per the previously referenced page in the 71 Owner's Manual, TEXT files "are formatted to be read by other Hewlett-Packard computers, such as the HP-75", which would imply they are LIF1.

(05-07-2015 08:01 PM)Paul Berger (Canada) Wrote:  If you take the DOS text format file and copy it over without transforming it to LIF1 format, even if you get the correct file type set in the LIF directory, the READ command on the 71B is going to have a hard time understanding the file.

So don't do that. I use HPDir to copy DOS text files to/from LIF images with the -c option to perform the conversion. I also use HPDir to copy binary files to/from LIF images (see Post #2). You can experiment with this technique without a PIL-Box by using Emu71 and ILPer.

Dave
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ROM Images - Dave Frederickson - 12-10-2014, 03:51 AM
IRAM vs ROM - Dave Frederickson - 12-13-2014, 06:36 PM
ROMCOPY - Dave Frederickson - 12-20-2014, 08:59 PM
[FRAM71] Bankswitching? - Hans Brueggemann - 02-07-2015, 06:55 PM
v430 beta - Dave Frederickson - 02-16-2015, 06:09 AM
RE: [FRAM71] Pre-Production Batch - cruff - 02-11-2015, 11:45 PM
v430 beta - Dave Frederickson - 02-17-2015, 05:14 AM
v430 beta - Dave Frederickson - 02-27-2015, 05:20 AM
1MByte FRAM71 - Dave Frederickson - 03-14-2015, 09:18 PM
RE: [FRAM71] Pre-Production Batch - Gene - 03-15-2015, 02:04 AM
V501 Firmware woes - Hans Brueggemann - 04-23-2015, 07:12 PM
Eagerly awaiting mine - cruff - 04-24-2015, 12:40 AM
RE: [FRAM71] Pre-Production Batch - cruff - 04-24-2015, 12:53 PM
Received my FRAM71 today! - cruff - 04-25-2015, 07:03 PM
RE: [FRAM71] Pre-Production Batch - cruff - 04-26-2015, 12:27 PM
RE: [FRAM71] Pre-Production Batch - Dave Frederickson - 05-07-2015 08:57 PM
RE: [FRAM71] Pre-Production Batch - Erwin - 10-04-2016, 08:28 PM
MEMBUF - Dave Frederickson - 05-13-2015, 02:50 AM
FRAM71 V502 - Hans Brueggemann - 05-16-2015, 04:02 PM
RE: [FRAM71] Pre-Production Batch - Erwin - 01-02-2016, 08:13 AM
RE: [FRAM71] Pre-Production Batch - Oulan - 06-03-2015, 02:10 PM
RE: [FRAM71] Pre-Production Batch - Oulan - 06-03-2015, 03:47 PM
RE: [FRAM71] Pre-Production Batch - Oulan - 06-05-2015, 09:44 AM
RE: [FRAM71] Pre-Production Batch - Oulan - 06-08-2015, 07:13 AM
FlashPRO - Dave Frederickson - 06-11-2015, 03:42 PM
RE: [FRAM71] Pre-Production Batch - cruff - 06-13-2015, 12:04 PM
RE: [FRAM71] Pre-Production Batch - cruff - 06-15-2015, 11:22 PM
Blinkin' Lights - Dave Frederickson - 07-15-2015, 03:07 AM
FRAM71 LED - Hans Brueggemann - 07-16-2015, 11:47 AM
RE: [FRAM71] Pre-Production Batch - Andres - 01-25-2016, 10:40 PM
RE: [FRAM71] Pre-Production Batch - Erwin - 10-04-2016, 08:46 PM
RE: [FRAM71] Pre-Production Batch - Erwin - 10-04-2016, 09:04 PM



User(s) browsing this thread: 2 Guest(s)